F150 Brake Upgrade Kit Guarantees Firm Braking With Ford F150 Brake Pads
The Ford F150 is a versatile and powerful pickup truck which can tow, haul and handle off-road driving impeccably. Therefore, it is very important to control its speed using high quality F150 brakes calipers, pads and rotors. They should be made of innovative materials such as carbon fiber ceramic and high strength stainless steel. How can a driver pick the most suitable brake pads and rotors for the Ford F150 pickup truck? Read the Ford F150 brake rotors reviews below to discover our selection of the best brake pads and rotors for your Ford F150 pickup truck that are available today.
If you’re short of time, here are some links that can help to find the best Ford F150 pickup truck brake kit. Rest assured that we only select the best products.
Best Brake Pads For Ford F150 4×4 Table
CAR MODEL & YEAR
Power Stop KC6268-36 Z36 Truck & Tow Front and Rear Caliper Kit-Drilled/Slotted Brake Rotors, Carbon-Fiber Ceramic Brake Pads, Calipers
2015 Ford F150
Each brake caliper is lubricated and pressure tested.
Carbon fiber ceramic brake rotors are effective and long lasting.
The kit’s components meet OE requirements for direct bolt-on installation.
Kit components are coated with Silver Zinc Dicromate to prevent rusting or corrosion.
The rotors can warp after 10,000 miles.
The rotors can produce a high-pitched squealing noise.
Callahan CCK01890 FRONT + REAR Powder Coated Red  Calipers +  Zinc Plated D/S Rotors + Low Dust  Ceramic Pads
Ford F-150 Pickup 2009 2 Wheel Drive 6 Lug models with Base Payload Package and the Ford F-150 Pickup 2009 – 4 Wheel Drive 6 Lug models.
Installation is effortless.
The components are tested before shipping.
The rotors are zinc-plated for resistance against corrosion.
All the components in this kit are brand-new.
Drivers can receive the kit with some components missing.
For 2012-2020 Ford F-150 PowerSport Front Rear Black Zinc Cross Drilled Slotted Brake Rotors Kit + Ceramic Brake Pads
2012 to 2020 Ford F150 pickup truck models
The brake rotors are cross drilled for enhanced cooling efficiency.
These brakes operate with minimal noise.
The components in the kit meet OE requirements hence can be installed very easily.
The brake rotors are slotted for a firm bite and reduced stopping distance.
The brakes will produce a loud noise when new before breaking them in.
This kit can arrive with the packaging damaged and rotors unpainted.
Callahan CDS02409 FRONT 350mm + REAR 348mm D/S 6 Lug  Rotors + Ceramic Brake Pads + Clips [ fits 2012 2013 2014 2015 2016 2017 Ford F150 | Raptor 4WD | SSV]
2012 to 2014 Ford F-150 6-lug models, 2015 to 2017 Ford F-150 ,odels with manual parking brake, 2012 to 2014 Ford F-150 Raptor 4WD models, 2017 to 2018 Ford F-150 Raptor 4WD models and 2016 to 2017 Ford F-150 SSV models with manual parking brake
The brake rotors are made of carbon-fiber ceramic for excellent heat absorption and maximum durability.
These brakes guarantee quiet braking.
The components in this kit are designed according to OE requirements for easy, bolt-on installation.
The kit can arrive incomplete with missing components.
Power Stop K6803-36 Front and Rear Z36 Truck & Tow Brake Kit, Carbon Fiber Ceramic Brake Pads and Drilled/Slotted Brake Rotors
2017 to 2015 Ford F-150 truck
The brake rotors in this kit are manufactured using carbon-fiber ceramic for optimal operation in extreme conditions.
The brake rotors are cross-drilled and slotted for enhanced cooling and gas expulsion during operation.
This brake kit contains all the components that are required for successful installation.
The brake rotors can arrive chipped or rusted.
1. Best Performance Brakes For Ford F-150 – Power Stop KC6268-36 Z36 Truck & Tow Front and Rear Caliper Kit-Drilled/Slotted Brake Rotors, Carbon-Fiber Ceramic Brake Pads And Calipers
For drivers whose highest priority is performance, the Power Stop KC6268-36 Z36 kit is the best. It contains brake rotors, brake pads and calipers that are specifically made for heavy duty vehicles such as the Ford F150 pickup truck. Drivers that haul, have upgraded their wheels to a larger size or enjoy off-road thrills will find that this set is perfect for the job. The set-up delivers more brake bite than all other brands without producing noise and dust. Furthermore, its components are made of new materials and processes. The rotors are drilled and slotted with precision for the most efficient cooling. The brake pads are manufactured using Z36 extreme performance Carbon-Fiber Infused Ceramic so they are durable and heat-resistant. Furthermore, the brake calipers are red powder coated and subjected to temperature and pressure tests at the factory to guarantee maximum performance. These OE components create the ultimate performance brake system for your Ford F150 pickup truck.
The set is designed to ensure perfect speed control on the Ford F150 pickup truck. The brake pad shims are manufactured using stainless steel using G3000 metallurgy. As a result, they enhance stopping power without noise production. The system comes with cross-drilled and slotted rotors that keep the brakes on your truck cool even when driving in hot weather. Together, these components provide dust-free braking. They also work together to resist the tension created by towing, hauling, off-road driving, and suspension lifting. Drivers can install them with confidence because each part is tested in the Power Stop Chicago, IL facility before shipping.
- Each brake caliper undergoes a process of lubrication and pressure testing before packaging.
- The carbon fiber ceramic brake rotors provide ample bite for performance and day driving.
- This system provides an excellent bolt-on upgrade for your truck.
- Drivers can install them with no need for any modification because the components in this kit fulfill OE tolerances.
- Longevity is guaranteed thanks to the Silver Zinc Dicromate applied upon the components to prevent rusting or corrosion.
- The rotors can warp after 10,000 miles.
- The rotors can produce a high-pitched squealing noise.
- This kit can arrive with some components already damaged.
Best Budget Brakes For Ford F-150 – PowerSport Front Rear Black Zinc Cross Drilled Slotted Brake Rotors Kit + Ceramic Brake Pads
The PowerSport Black Zinc Front and Rear Brake Kit is ideal for the driver that wants precise brakes at an affordable price. This set contains eight ceramic brake pads and four black zinc coated brake rotors. The brake pads are made of ceramic to keep them cool under braking pressure. They are also shimmed to ensure a firm bite, eliminate operating noise, absorb vibrations and reduce the stopping distance. The rotors also have a unique design which promotes ventilation and rapid heat dissipation.
Developed for installation in the front and rear of your Ford F150 truck, this set is the solution for efficient braking in all environmental conditions. The rotors are cross drilled to ensure rapid heat reduction, race car looks, efficient air ventilation and prevent warping. They are also slotted to guarantee a firm pad bite which ensures immediate stopping. Moreover, they are coated with Zinc to prevent rusting or corrosion. Drivers who install this system on their trucks can expect many years of dependable service. The design and construction of these components ensure that they provide superior braking performance. For the driver’s convenience, these parts meet all Original Equipment Manufacturer (OEM) standards. As a result, they arrive ready to install in your Ford F150 pickup truck with no adjustments required. Notably, this setup does not contain any brake calipers. However, it is an excellent choice for drivers looking for reliable and pocket-friendly aftermarket brakes.
- The brake rotors are cross drilled for enhanced cooling efficiency.
- These brakes operate with minimal noise.
- The components meet OE requirements for easy installation.
- The brake rotors are slotted for a firm bite and reduced stopping distance.
- The brakes will produce a loud noise when new before breaking them in.
- This kit can arrive with the packaging damaged and rotors unpainted.
The Power Stop company has manufactured copper-free brake pads ever since its establishment in 1995. Their goal is to provide drivers with top quality brakes made of noiseless and fail-free carbon-fiber ceramic material. Power Stop also owns the popular Callahan Brake Parts brand. One of their most popular products is the Power Stop Truck & Tow Front and Rear Caliper Kit.
The Powersport Superstore company manufactures brake systems for automobiles and motorcycles. Located in Cedar Park, TX, USA, they focus on maintaining quality brake performance throughout. This company delivers OEM, slotted, drilled as well as slotted & drilled brake rotors. An outstanding product from Powersport Superstore is the PowerSport Black Zinc Cross Drilled Slotted Brake Rotors Kit.
Founded in 1955, the Callahan company is based in the United States of America and they manufacture brake kits for a wide range of vehicles. This manufacturer takes pride in implementing quality materials into their brakes using high-tech procedures such as electrostatic powder coating. The Callahan brake company is currently owned by Power Stop LLC. One of their most well-known products is the Callahan CCK01890 FRONT + REAR brake kit.
F150 Brake Rotors And Pads Benefits
F150 Rotors Carbon Fiber Ceramic Material
Brake rotors experience substantial friction during use and should always be manufactured using strong, heat-resistant materials. Carbon fiber ceramic is the most innovative of these materials. It is manufactured by combining porous carbon fiber with liquid silicon. The result is a material that is light and strong which stays cool even in extreme temperatures. Modern brake rotors are manufactured using carbon fiber ceramic material. Drivers can experience cool operation, immense braking power and years of durability after installing carbon fiber ceramic rotors in their Ford F150 pickup trucks.
Rotor For Ford F150 Cross Drilled Design
While driving a Ford F150 pickup truck, the brake rotors undergo colossal pressure generated from stopping a 4,653lb automobile. Repeatedly applying the brakes on this pickup truck generates high temperatures that can warp the brake rotors. Thankfully, modern rotors are cross-drilled and slotted to keep them cool. The precision cross drilled holes enhance air circulation that keeps the rotors cool. Furthermore, the rotors are slotted for efficient gas elimination during operation. This innovative design reduces the generation of heat in your brake rotors and extends their lifespan.
Ford F150 brakes Rust Resistant Coating
When driving the Ford F150 pickup truck in wet weather conditions, the brake rotors and calipers frequently come into contact with water. Seeing as these brake components have metal content, they are prone to rusting. Fortunately, modern brake rotors and calipers are coated with special materials to stave off rusting. The rotors are coated with Silver Zinc Dicromate while the calipers are powder coated. These additional features keep corrosion at bay and maximize operational effectiveness.
Ford F150 Performance Brakes Types
Rotors For Ford F150
Brake rotors are circular components that are attached to each wheel. They can be clamped upon to reduce the overall speed of your Ford F150 pickup truck. Brake rotors come in various types. The Blank and Smooth brake rotors are commonly found on many passenger vehicles. They have a smooth, blank metallic surface all around the rotor. Drilled rotors have precision-drilled holes along the surface of the rotor. Slotted rotors have long slots along the circumference of the brake rotor. Finally, Drilled and Slotted brake rotors have both precision holes and slots along the circumference. These features improve braking power and enhance the performance of the brakes.
F150 Brake Upgrade Calipers
The brake calipers are some of the most important parts of an automobile. When activated, they clamp down on the brake rotors and cause friction. This reduces the rotation speed of the wheel and slows down the car. There are various types of brake calipers. The Floating Caliper has a piston on only one side and applies friction only on the inboard side of the rotor. A Sliding Caliper applies a double slowing function upon the rotor where the piston applies pressure upon one brake pad and a movable piston applies pressure upon the other. Last but not least, the Fixed Brake Caliper is mounted on a bracket with no sliding components. It can have two to eight pistons where braking power increases with the number of pistons. The Fixed Caliper is regarded as the best type due to its substantial effectiveness.
F150 Performance Brakes Pads
The brake pads are an essential part of an automobile’s braking system. Upon application of force, they clamp down upon the brake rotors. This causes friction and slows down the vehicle. There are various types of brake pads. Semi-metallic brake pads contain between 30% and 65% metal. They are durable, affordable and cause moderate wear on the rotors. Semi-metallic brake pads are usually used on high performance vehicles such as race cars. Low-metallic, Non-Asbestos Organic (NAO) brake pads are made of a combination of copper or steel and an organic material. They absorb heat efficiently and thus facilitate effective braking.
Non-Asbestos Organic (NAO) brake pads are made of organic materials such as Kevlar, fiber, rubber and glass. They operate quietly and do not cause damage on the brake rotor. These brake pads are made of ceramic materials combined with copper fibers. Notably, Non-Asbestos Organic (NAO) brake pads maximize overall driver comfort because they deliver a firm bite with no noise. They also last long and produce little to no brake dust. Best of all, ceramic brake pads maintain optimum operation over a wide range of temperatures.
Ford F150 Brake Kits Key Features
F150 Rotor Cross-Drilling
One of the most important features to look out for in brake systems is cross-drilling. The rotors are often cross-drilled to increase their cooling capability, durability and performance. This precision process is applied on different types of rotors, especially the carbon-fiber ceramic variety. Cross-drilling has a wide variety of advantages and is therefore a good feature to look out for.
Best Rotors For F150 Carbon Fiber Ceramic Material
Carbon fiber ceramic is the best material for brake pads. It has a high level of mechanical strength. Therefore, it can accommodate the braking requirements of a heavy duty vehicle such as the Ford F150 pickup truck. This material is also light and absorbs heat efficiently. As a result, it does not suffer from problems such as overheating. Drivers should always look out for carbon-fiber ceramic material when shopping for brake pads.
F150 Rotors And Pads OEM Fitment
Modern brake kits are manufactured according to Original Equipment Manufacturer (OEM) specifications. As such, they can be installed on your automobile with no need for any modification. Installing OEM components in your vehicle takes a very short time because each part fits perfectly. As such, OEM fitment is a feature to look for when shopping for brake kits.
F150 Brake Pads And Rotors Reviews And Recommendations
Best OEM Installation Brakes For Ford F-150 – Callahan CCK01890 FRONT + REAR Powder Coated Red  Calipers +  Zinc Plated D/S Rotors + Low Dust  Ceramic Pads
Drivers in need of substantial stopping power after OEM installation should look no further than the Callahan CCK01890 brake kit. Within it, drivers can find four powder coated red calipers, four zinc plated D/S rotors and eight low dust ceramic pads. These parts are all compatible with direct bolt-on installation in your Ford F150 pickup truck. The ceramic brake calipers are rigorously tested and inspected before shipping to ensure that they deliver high quality services while maintaining industry-certified levels of safety. Moreover, they are subjected to pressure testing to prevent leaks and make firm braking possible. The springs, bushings, seals and bleeder screws are all brand-new. In addition to that, they are heat-resistant for cool operation. These parts are clean and ready to install right after unpacking. A 12 month warranty covers the brake system for driver convenience. It can be installed in the Ford F-150 Pickup 2009 – 2 Wheel Drive 6 Lug Models With Base Payload Package and the Ford F-150 Pickup 2009 – 4 Wheel Drive 6 Lug Models.
- Installation is effortless because the components in this kit can be fitted with a direct bolt-on procedure.
- The components are tested before shipping.
- The rotors are zinc-plated for resistance against corrosion.
- All the components in this kit are brand-new.
- Drivers can receive the kit with some components missing.
Best Users Choice Brakes For Ford F-150 – Callahan CDS02409 FRONT 350mm + REAR 348mm D/S 6 Lug  Rotors + Ceramic Brake Pads + Clips [ fits 2012 2013 2014 2015 2016 2017 Ford F150 | Raptor 4WD | SSV]
Callahan Front and Rear Brake Kit Unpacked
To get the best driving experience from a Ford F150 truck, it is necessary to equip it with a user-friendly performance brake system. The Callahan CDS02409 brake kit is ideal for this application. After drivers purchase it, they get four 6 lug drilled & vented premium brake rotors where the front diameter is 350 mm and the rear diameter is 348 mm along with eight ceramic brake pads. The pads are specially developed to ensure rust-resistance, confident speed control and a quiet drive. During operation, they also reduce noise and dust production. These parts are all designed according to Original Equipment (OE) specifications so they can be installed without any additional modifications. Moreover, they are covered by a 12 month warranty which is well appreciated by users. Drivers can install the brake system in the 2012 to 2014 Ford F-150 6-lug models, 2015 to 2017 Ford F-150 models with manual parking, 2012 to 2014 Ford F-150 Raptor 4WD models, 2017 to 2018 Ford F-150 Raptor 4WD models and 2016 to 2017 Ford F-150 SSV models with physical brake for parking.
- The brake rotors are made of carbon-fiber ceramic for excellent heat absorption and maximum durability.
- These brakes guarantee quiet braking.
- The components in this kit are designed according to OE requirements for easy, bolt-on installation.
- The kit can arrive incomplete with missing components.
Best Durability Brakes For Ford F-150 – Power Stop K6803-36 Front and Rear Z36 Truck & Tow Brake Kit, Carbon Fiber Ceramic Brake Pads and Drilled/Slotted Brake Rotors
Manufactured using high strength carbon-fiber ceramic material, the Power Stop K6803-36 brake kit is every driver’s solution for superior braking in the Ford F150 pickup truck. The set contains two pairs of brake pads and rotors. The carbon fiber ceramic material within the brake pads enables good braking under extreme conditions. Furthermore, the stainless steel brake rotors are cross drilled for enhanced cooling and slotted for maximum bite while braking. As such, they furnish remarkable, dust-free performance. This system ensures optimum braking operation while towing or driving off-road. The items in this set maintain prime execution while hauling heavy loads, after installing lifted suspension and when towing a trailer. Everything that is needed for installation is contained within the package. Drivers will find brake pads and rotors that are perfectly matched, stainless steel hardware, pin bushings and high temperature resistant brake lubricant. These constituents will fit perfectly on the front and rear axles of 2017 to 2015 Ford F-150 trucks.
- The parts are manufactured using carbon-fiber ceramic for optimal operation in extreme conditions.
- The brake rotors are cross-drilled and slotted for enhanced cooling and gas expulsion during operation.
- This brake system has all the items that are required for successful installation.
- The brake rotors can arrive chipped or rusted.
Ford F150 Brake Pads Tips
- The braking system in your Ford F150 pickup truck endures a lot of wear and tear. Therefore, it needs regular checking especially if you note a burning smell or unnecessary pressure when braking.
- Perform a brake fluid flush every 2 years or 30,000 miles to get rid of any moisture that could have accumulated to prevent corrosion.
- Bleed your Ford F150 pickup truck’s brake lines every two to three years to remove any excess air that could have collected within.
- Upgrade your brake system’s parts by replacing blank or smooth rotors with precision drilled alternatives.
- Avoid overloading your vehicle and always apply moderate pressure when braking.
Brakes For Ford F150 FAQs
Q: F150 brake replacement kit contains rotors, calipers and brake pads for both the front and back axles?
A: Yes it does. Many manufacturers bundle front and rear brake components into the same set for convenient installation.
Q: F150 brake pads kits require a break-in period?
A: By all means. Brake systems need some breaking-in to achieve full effectiveness.
Q: best brake pads for F150 are made of carbon-fiber ceramic?
A: Absolutely. The most ideal brake rotors are made of carbon-fiber ceramic material. They are heat-resistant, durable and deliver noiseless operation.
Q: brakes Ford F150 replacement should be done after which signs?
A; If a driver requires significant force to apply the brakes, notices a burning smell when braking or the rotor develops a serrated edge, the brakes need replacement.
Q: best brakes for F150 are lightweight?
A: Affirmative, lighter brake rotors are better because they reduce rotational inertia and a low amount of force will be needed to slow or stop the vehicle.
Best F150 Brake Pads Conclusion
The Power Stop KC6268-36 Z36 brake kit contains the best brake pads for Ford F150 pickup truck. It contains Ford F150 front brakes and back brakes for your pickup truck. The rotors in this set are manufactured using Z36 carbon-fiber ceramic resulting in favorable thermal conductivity and extended longevity. Moreover, the shims are made of stainless steel for optimum durability and low noise levels. The red powder coated calipers also improve the braking performance of your pickup truck. As a result, they are the best high performance aftermarket brake pads Ford F150 pickup truck. For drivers looking for quality at an affordable price, the PowerSport Black Zinc brake kit fits the bill. While it does not offer brake calipers and its components are not manufactured using the latest materials, this set-up delivers some brake pads and rotors that will provide ample stopping power without breaking your bank. To keep them in great condition, drivers should conduct regular checks to correct any wear and tear as soon as it occurs.
Table Of Contents
- 1 In a hurry?
- 2 Best Brake Pads For Ford F150 4×4 Table
- 3 Best 2 Brake Kits for Ford F-150
- 4 Best Budget Brake Kit for Ford F-150
- 5 Ford F 150 brakes Top Brands
- 6 F150 Brake Rotors And Pads Benefits
- 7 Ford F150 Performance Brakes Types
- 8 Ford F150 Brake Kits Key Features
- 9 F150 Brake Pads And Rotors Reviews And Recommendations
- 9.1 Best OEM Installation Brakes For Ford F-150 – Callahan CCK01890 FRONT + REAR Powder Coated Red  Calipers +  Zinc Plated D/S Rotors + Low Dust  Ceramic Pads
- 9.2 Best Users Choice Brakes For Ford F-150 – Callahan CDS02409 FRONT 350mm + REAR 348mm D/S 6 Lug  Rotors + Ceramic Brake Pads + Clips [ fits 2012 2013 2014 2015 2016 2017 Ford F150 | Raptor 4WD | SSV]
- 9.3 Best Durability Brakes For Ford F-150 – Power Stop K6803-36 Front and Rear Z36 Truck & Tow Brake Kit, Carbon Fiber Ceramic Brake Pads and Drilled/Slotted Brake Rotors
- 9.4 Ford F150 Brake Pads Tips
- 9.5 Brakes For Ford F150 FAQs
- 9.6 Q: F150 brake replacement kit contains rotors, calipers and brake pads for both the front and back axles?
- 9.7 Q: F150 brake pads kits require a break-in period?
- 9.8 Q: best brake pads for F150 are made of carbon-fiber ceramic?
- 9.9 Q: brakes Ford F150 replacement should be done after which signs?
- 9.10 Q: best brakes for F150 are lightweight?
- 10 Best F150 Brake Pads Conclusion