Samsung Galaxy S6 Edge+ users will be glad to know that there is now a TWRP Recovery installation guide for the Samsung Galaxy S6 Edge+. The TWRP Recovery will only work on the Samsung Galaxy S6 Egde+ model number SM-G928C so only proceed if you have that model.
Before you start, make sure to make a backup for all your important data. It is also important to not that doing this might damage or brick your device and that you will be attempting it at your own risk. Make sure all you have all the drivers installed/
Start by downloading Oden and the TWRP Recovery file. Next, extract the Oden file and disconnect the device from the PC. Now go to Setting > About Device and tap on the build number 7 times to get the developer option. Go back to Setting and select the Developer > Enable OEM Unlock and accept the warning.
Now, turn off the device and hold down Power, Home and Volume at the same time, when the warning screen pops up, press Volume Up to enter the download mode.
Select the Odin extract file and open the Odin Window. Connect your S6 Edge+ to the PC and wait for Odin to recognise your device. Load the TWRP File into Odin by clicking AP and locating the TWRP File. Make sure Re-partition is not selected and do not use PIT tab. Click Start. It will reboot once after it is done.
