Samsung Galaxy S2 Gets Android 4.4.2 KitKat Update With AOSB

Thanks to hackers people with phones don’t usually have to worry about whether they will get the latest update for their handset. One of the latest older devices to be receiving an update is the Samsung Galaxy S2.

The Samsung Galaxy S2 is classed as being an old handset and as such it won’t be getting updates. However hackers have done something about this and they have got KitKat 4.4.2 out by way of a custom ROM for the Samsung Galaxy S2 GT-I9100.

The ROM comes courtesy of the ProBAM team and it has the name of AOSB project ROM. It offers everything that is in CyanogenMod 11 ROM and AOKP, Omni, Slim and the Paranoid Android ROM.

AOSB comes packed with plenty of new features, this includes multi-windows, HALO, RAM bar, LCD density changer, audio stereo effect and OTA update support.

Anyone who owns the Samsung Galaxy S2 who wants to update and who has the GT-I9100 handset can follow the steps that are outlined below.

Pre-requisites
• The Android 4.4.2 AOSB ROMand the instructions given in this guide are meant for the Galaxy S2 GT-I9100 model only. Verify device model number by navigating to Settings > About Phone.
• Back up data and settingsusing a recommended custom recovery tool, like ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing phone setup. In Recovery, choose Backup and Restore and tap Backup.
• Verify correct USB driversfor the phone are installed on the computer (download Galaxy S2 I9100 USB drivers).
• Ensure USB debugging mode is enabledon the phone, by navigating to Settings > Developer Options (NOTE:Tap the phone’s Build Number seven times to unlock or reveal the hidden Developer Optionsunder Settings.) Then select the checkbox to enable USB debugging mode under Settings > Developer Options.
• Make sure the phone has at least 80% battery chargeto prevent unexpected device shutdown (due to battery drain) while installing the ROM.
• Ensure the device is unlocked(not locked to a specific carrier) androotedwith latest ClockworkMod (CWM) Recovery (v6.0.4.5) installed. Alternatively, install CyanogenMod 10.2 Nightly which includes CWM recovery v6.0.4.5.
• If the device is stuck at booting or experiencing boot loop issues, perform Wipe Cache Partition and Wipe Dalvik Cache a few more times before rebooting.
• Allow newly installed ROM to stabilise for five minutes before you start working on it.
Flashing Instructions
1: Download Android 4.4.2 KitKat AOSB ROM for Galaxy S2 I9100 to computer
2: Download Google Apps package
3: Connect the Galaxy S2 to computer via USB cable. Without extracting, copy the downloaded firmware zip and Google Apps zip files to the root folder of the phone’s SD card.
4: Power off the phone and wait for 5 to 10 seconds until the device shuts down completely.
5: Press and hold Volume Up, Home and Power buttons together, until the Galaxy S2 logo appears on screen.
6: Release all three buttons at the same time to boot into recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
7: Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress) and choose Yes on next screen to confirm the action.
8: Return to CWM recovery main menu and select Mounts and Storage > Format System and click Yes on next screen to confirm. Then perform Wipe Cache Partition. From the main menu of CWM recovery, go to Advanced and choose Wipe Dalvik Cache. Then hit Yes on next screen to confirm.
NOTE: Flash CyanogenMod 10.2 Nightly before you proceed (use step 9). Once CM 10.2 Nightly is flashed, you will have access to CWM recovery v6.0.4.5 and then you can install/flash AOSB ROM (repeat step 9).
9:Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the AOSB firmware filewhich you copied earlier to your phone’s SD card. Choose Yes on next screen to confirm the firmware installation.
10: Repeat the previous step to install Google Apps as well.
11: Once Google Apps is also installed, select “+++++Go Back+++++” and reboot the phone by tapping reboot system now from the recovery menu. Your Galaxy S2 I9100 will restart and it may take about 5 minutes for first boot. So, do not interrupt the process.

If you have followed the above steps carefully your Samsung Galaxy S2 should now be running KitKat 4.4.2.

Leave a Comment

DMCA.com Protection Status